Blog

January 10, 2019

We are excited to announce that our team has moved to a new location. From 9 January 2019 onward, the address below will be used in all our communication and corresponding activities.

Machinosis Co., Ltd.

85/14 Moo 3 Phla

Banchang, Rayong 21130

THAILAND

T +66 (0) 814291748

E...

September 2, 2018

When we do machinery problem troubleshooting, we want to focus on finding the root causes and then recommendation to fix or rectify it without worry about using tool and collecting the data. Vibration analyzer plays a major role to this as we need a tool which can give...

June 18, 2018

Machinosis will be participating ASUG 2018 conference in San Diego, CA this year. Case study of different applications will be presented, for example vibration analysis of turbomachinery, structural vibration analysis, acoustic/noise source identification, etc. The age...

June 2, 2018

An agitator installed in petrochemical plant is reported excessive vibration amplitudes measured at motor, gearbox and associated structures when operating speed is increased from 42 to 84 rpm due to process requirement. Motor running speed is about 1488 rpm (or around...

May 30, 2018

This is another technique required for machinery diagnostician to solve structural vibration problems which can result in excessive vibration amplitude of machine skid, foundation/support, piping and associated structures, etc. it can be due to resonant vibration probl...

February 18, 2018

From our experience piping vibration problem is increasing demand for analysis and field troubleshooting which can be due to increasing productivity (power density, flow rate, etc.), reducing manufacturing cost (thin wall pipe is used), and/or dynamic behaviors are not...

January 26, 2018

Cooling oil pipe of 700 MW transformer revealed excessive vibration amplitude measured at cooling oil pump at more than 200 microns, pp but acceptable level suggested from manufacturer is below 100 microns, pp. This can lead to pipe fatigue failure and crack, hence, un...

January 25, 2018

We will be presenting a topic "Applying finite element modal analysis to structural vibration assessment and correction" at Asia vibration conference, Singapore in April this year. This is blended technique of analytical and experimental methodology to effectively solv...

Please reload

Featured Posts

Vibration analyst CAT IV course by Machinosis

January 26, 2019

1/7
Please reload

Recent Posts
Please reload

Search By Tags