#MotionAmplification

Jan 13
2 min

Commissioning support and troubleshooting high vibration problem on a new steam turbine

This is our last job of year 2021 working on a new steam turbine – generator set during commissioning. Unit installation was completed and it is about to be handed over to customer. However, they encountered high vibration amplitudes at turbine exhaust bearing during load variation test, therefore, detail vibration measurement, analysis, and troubleshooting is required. The existing vibration instrument is very minimum as there is only a seismic vibration sensor installed in

63 views0 comments

Feb 18, 2020
1 min

CBM Day 2020 Conference – “Creative Talents”

There was great and pleasure to be a part of this event last week. This is the biggest CBM conference in the country bringing suppliers, vendors, consultants, and customers together in one place each year. As usual, we have exhibition booth showing our innovative products and services in the way to monitor and diagnose machinery and associated structures/piping problems. One of our customers also presented a topic on using Motion Amplification camera, IRIS M & MX from RDI Tec

81 views0 comments

Oct 28, 2019
2 min

Bump Test with Motion Amplification Camera

In general we perform bump/impact test to find natural frequency as rough test to prove if resonance problem exists. But however if we would like to see mode shape, several measurement points of transfer function/frequency response function between input force and vibration output is required. Modal analysis software is then used to curve fit the data and identify natural frequency, mode shape, and damping. Motion amplification (MA) camera is a modern tool which is normally

301 views0 comments

Jul 9, 2019
1 min

Shared & learn session, CBM Day on Tour 2019 @ Korat, Thailand

Machinosis participated and presented at CBM Day on Tour 2019 at Korat, Thailand. This is the biggest CBM conference in the country. We presented a topic of "Visualizing vibration with motion amplification technology and applications". We seem to get a lot of interest with live demo data of this new technology. Thank you all stopping by our booth and discussion. There was great and pleasure - See you again next year! #motionamplification #resonance #operatingdeflectionshape #

71 views0 comments

Feb 9, 2019
1 min

CBM Day 2019 Conference, Chonburi Thailand

Machinosis participated CBM Day 2019 with exhibiting booth to show our products and services capability during 7-8 Feb. This is great opportunity to catch up with our customers, friends, business partners, and people involved in CBM and Maintenance works from around the country. There were about 300-400 participants this year. We displayed highlighted products below. IRIS M motion amplification from RDI Technologies, Inc., USA Innovative and powerful vibration analyzer and mo

110 views0 comments

Jan 10, 2019
1 min

We moved!

We are excited to announce that our team has moved to a new location. From 9 January 2019 onward, the address below will be used in all our communication and corresponding activities. Machinosis Co., Ltd. 85/14 Moo 3 Phla Banchang, Rayong 21130 THAILAND T +66 (0) 814291748 E contact@machinosis.com W www.machinosis.com This will enable us to better serve our customers as new office is fully equipped with customer training facility, lab/workstation for instrument test & calibra

118 views0 comments

Nov 26, 2018
1 min

The impossible is now possible : measuring pipe vibration inside the furnace

High vibration was observed at pipes installed inside the furnace in a refinery and this results in a concern of fatigue failure. This can cause plant unplanned shutdown, hence, production lost. Customer would like to do fatigue failure assessment based on vibration data (frequency and amplitude) inputted. Measuring such pipe vibration with conventional contact vibration sensor/method is impossible due to its extreme operating condition. How is about non-contact vibration mea

134 views0 comments

Nov 9, 2018
1 min

Iris M Motion Amplification Certified Course in Thailand

We just completed our first 2 days Iris M Motion Amplification certified course in Thailand during 6-7 Nov 2018. Thanks to JT Chung for delivering the course and we now have more certified Iris M users in the country. As for customer, this would help them to better see vibration problems, hence, effective solution. Plant reliability and availability can then be improved. #motionamplification #IrisM #MAcertificatedtrainingcourse

71 views0 comments

Nov 1, 2018
1 min

Participating Openhouse 2018: Tools and new innovation exhibition

Machinosis participates Openhouse 2018: Tools and new innovation exhibition during 31 Oct to 01 Nov at EGAT (Electricity Generating Authority of Thailand). We brought in two highlighted products to the event as followings. * Alta Solutions 's multiple channels portable vibration analyzer, AS-1250FE and 410 software * RDI Technologies's IRIS M motion amplification system Participants are from all EGAT power plants around the country. We seem to get a lot of attention and inter

34 views0 comments

Jul 25, 2018
1 min

Out of reach, yes we can!

One of the reasons we invested in Iris M Motion Amplification (MA) camera is for piping including its associated structures and tower/stripper vibration measurement and analysis. Conventional vibration measurement might not be accessible or feasible in many cases due to height and extreme temperature, for example, piping vibration analysis of amine pipe (prone to slug flow) and its stripper, fluid catalytic cracking (FCC) tower, high temperature steam pipe, etc. In many cases

90 views0 comments

Jun 2, 2018
2 min

Motion amplification of agitator

An agitator installed in petrochemical plant is reported excessive vibration amplitudes measured at motor, gearbox and associated structures when operating speed is increased from 42 to 84 rpm due to process requirement. Motor running speed is about 1488 rpm (or around 24.8 Hz). Vibration amplitudes is maximum at motor non-drive end (NDE) measurement point with amplitude 8.4 mm/s, RMS. Predominant frequency components are at agitator/mixer and motor speed. Our approach: We wa

370 views0 comments

May 30, 2018
1 min

Modal and operating deflection shape analysis course

This is another technique required for machinery diagnostician to solve structural vibration problems which can result in excessive vibration amplitude of machine skid, foundation/support, piping and associated structures, etc. it can be due to resonant vibration problem and/or weak stiffness structure due to insufficient support, crack, and/or looseness. I have been looking for this course for many years but I could not find the practical one until I have created my own cour

105 views0 comments

Apr 4, 2018
1 min

We got many good shots today!

We started inducing and demonstrating motion amplification (MA) to our customers in the region with many good feedbacks and comments so far. This is very effective complementary tool to conventional vibration measurement and analysis which can be applied to almost every applications in many industries. However, we first initially focus on machinery, structure, and piping vibration analysis mainly in oil & gas and power generation industries. It helps us to see vibration probl

98 views0 comments